Page 5
1.2 Built-in safety features (depending on model)
Fold model:
Each time before you use the stairclimber, make sure that the quick release
lever (Figure 2, page 8) on the handles is tightened properly.
It must be possible to tilt the load from the standing position without assistance.
The position of the handle section in relation to the frame must not be altered.
Dolly model:
Figure A shows the protection system when retracted.
Figure A shows the protection system when extended. The sliding arm must be
at right-angles to the protection system.
Each time before starting up the stairclimber, make sure that the protection
system is properly folded away (retracted, Figure D).
Important:
Do not use the protection system in the extended position while operating the
stairclimber on stairs.
Figure A
Figure B
Sliding
arm
Protection
system
Sliding arm
Protection system
Figure C: folding away
Figure D: support system retracted
