Page 11
2.5. Control unit
(Figure 5)
2.5.1. ON/OFF and Single-step/Continuous mode multi-function switch (P)
The LIFTKAR is ready for operation after the battery pack has been switched on
(ON/OFF switch on power pack) and you briefly press button P. This is confirmed
by the green LED display on the control unit going on. The LIFTKAR is in Single-
step mode.
If you briefly press button "P" again the unit switches to Continuous mode. This is
signalled by the LED flashing green.
Pressing the button for longer than 3 seconds switches the LIFTKAR off.
2.5.2. LED display
Green light on: LIFTKAR is in Single-step mode. Pressing one of the UP/DOWN
switches (see figure 6, page 12) starts the LIFTKAR moving. The unit switches
off automatically after one climbing cycle has been completed (raising or
lowering the LIFTKAR one step).
LED
ON/OFF
multifunction key P
Speed selector
