Page 22
Compensation charging
When the battery pack is fully charged the charger switches go compensation
charging mode. The display shows the battery symbol with 4 bars.
If the charging procedure does not start there are two possible causes:
Display:
Symbols
and
flash alternately ...
battery is connected the wrong way
round
Display: Symbols
and
flash alternately ... Contact between charger
and battery pack has been interrupted - contact problem
Check the charger cables, contacts, battery pack, etc.
6.1.3. Safety systems - technical data
Safety systems
-
Protection against short-circuit in charger cable
An electronic circuit prevents damage due to a short circuit in the charger
cable.
Display: the first bar flashes
- Protection against connecting up the wrong way round
An electronic circuit prevents damage due to the charger cable being
connected the wrong way round.
Display: Symbols
and
flash alternately
- Protection against overheating
As the ambient temperature increases the charger reduces the charging current or
interrupts the charging procedure. The charging procedure starts again as soon as the
temperature has decreased.
