18
2. Positions of Drive Side Plates
Confirm that right and left drive side plates are symmetrically
positioned. → See p. 2
4.
NOTE: If drive side plates are not positioned equally on right and left sides, it may cause belt deviation. Be
sure to check their positions before using conveyor because side plates may have shifted out of
position in transit.
6
BELT ALIGNMENT ADJUSTMENT
When belt is not correctly aligned, make adjustments as follows:
6-1. PRIOR CHECKING
1. Frame Condition
Confirm full length of frame is level on top, straight and not bent in any place.
→
See p. 11.
Drive side plate
Measure this length on
both sides to check
installation condition of
right and left drive side
plates.
Correct condition
Dislodgment
Pulley of non-deviation model
3. Dirt on Pulleys
Check drive pulley, head and tail pulleys, etc. for dirt. Remove any dirt and clean. (Remove drive bottom
cover to check.)
4. Loading Condition
Improper loading, i.e. not-centered, may cause belt deviation.
5. Dislodgment of V-form Strip
For non-deviation models(GLV, GLHV model, etc.), check if V-form strip on belt undersurface has
dislodged from V-form belt guidance grooves on pulleys and rollers. (Remove drive bottom cover to
check.)
