13
3-3. INSTALLING INVERTER UNIT
If inverter unit is delivered in separate packaging, install it as follows:
NOTE: For constant-speed type using 200V three-phase power source, standard machine has only lead
wire terminal of motor, ON/OFF switch is optional.
Unpack inverter unit. Install it near drive unit by tightening inverter unit attachment bolts (insertable bolts)
into side slot of frame, as shown in figure below.
NOTE: If it is necessary to install inverter unit separately from drive unit, connect them using extension cable
(optional) as shown in figure above.
Inverter unit
Power supply cable
Extension cable
(optional)
Terminal
base
Drive unit
Motor cable
Motor
