12
MACHINE LENGTH (m)
～
3.5
～
4.0
～
4.5
～
5.0
～
5.5
～
6.0
LENGTHS OF DIVIDED
FRAMES (m)
(1.5)
＋
2.0
(2.0)
＋
2.0
(1.5)
＋
2.5
(2.5)
＋
2.5
(2.5)
＋
3.0
(3.0)
＋
3.0
PACKAGING
Belt width of 300mm or less: 1 package
Belt width of 350mm or more: 2 packages
ASSEMBLY
METHOD
1. Loosen belt.
2. Assemble
main body.
3. Install
stands and
return rollers.
3-2. ASSEMBLING LONGER MACHINES
When conveyor exceeds 3m in length, it is delivered packed as shown below. Assemble conveyor
following the procedures in the tables. (*Return rollers are individually packed and temporarily attached
beside drive unit.)
Loosen belt by unfastening catch-
clips.
(1) Unfold belt. Check installation positions of frames.
(2) Join frames. → See “Joining Frames”, p.11.
(3) Move tap pieces to installation positions of stands and return rollers. Fix them
temporarily and install stands and
return rollers. → See p.9.
(4) When assembly is complete, take up belt slack (ref. p.17) and adjust belt alignment
(ref. p.18-21).
NOTE: If, as a result of machine length, it is difficult to turn over the entire assembly,
first assemble and turn over in sections, and then join frames.
Frame joint
Belt
*Return roller
Drive unit
(temporarily attached)
Frame joint
Belt
*Return roller
Head frame
Tail frame
(temporarily attached)
