SANKI MFC-S3B-F, Инструкция по эксплуатации

Страница: 13 / 36

11 / 32
7) Speed switching function
The operation pattern can be switched by powering ON/OFF the external signal [in3 Input] in
the operation mode (“A” mode).
Operation mode Ａ ｎ
Operation patten No. １ ２ １ ２
Display according to
external signal
out1 out2 out1 out2
Display according to
panel setting
Invalid Invalid P1 P2
in3 input status OFF ON OFF ON
※ Patterns “P3” and “P4” shown on the display cannot be controlled by external signals.
a)
Operation pattern switching method for each operation mode
(1) “A” mode
Turn ON/OFF the external signal [in3 Input].
(2) “n” mode
① Turn ON/OFF the external signal [in3 Input].
② Switch to P1/P2 in the panel setting.
b)
Amplitude adjustment method for each operation pattern
① The amplitude is adjusted in the “ n ” mode.
② When the Func key is pressed 3 times, the PAT lamp blinks, displaying [out1].
③ Each time the Freq ▲ key is pressed, the display changes in order of “ P1 ” → “ P2 ” →
“ P3 ” → “ P4 ” → “ out1. ” When the Freq ▼ key is pressed, the display changes in the
reverse order of the above.
④ Press the Set key when “ P2 ” is in display (to adjust the amplitude in the operation pattern
2).
※ To switch the operation pattern to No. 2 according to the external signal, press the Set
key when “ out1 ” is in display to turn [in3 Input] into the ON status.
⑤ The PAT lamp lights up, and the voltage% is displayed.
⑥ Adjust the amplitude by referring to “ 8. Operation and Amplitude Adjustment Method. ”
⑦ When the adjustment of both the patterns 1 and 2 is completed, s tart operation in the “A”
mode. In th e “A” mode, the setting is forced to be switched to the external signal.
[Internal circuit]
Example of circuit to be
arranged by customer