12
2.4 Front Panel
With its label adhered at the top of the device to describe the interface:
2.4.1 DS1 Connectors
The T1 Connectors are RJ48. There are two T1 ports per connector, each in a DSX pinout.
1.
A straight through cable (CABL-614G) can be used to connect directly to CSU/DSU boards such as
Sangoma’s A108DE.
2.
A split cable (CABL-630) should be used to connect Sangoma’s other T1/E1 boards such as the
(A101D,A102D, A104D).
Pinouts:
Pin1 = TRING_N
Pin 5 = RTIP_N
Pin2 = TTIP_N
Pin6 = 1
Pin3 = 1
Pin7 = 1
Pin4 = RRING_N
Pin8 = 1
Содержание T3 Mux M13
