SBOX-5210 - User Guide, Rev. 1.0
// 21
4.2.
Front I/O Panel
Figure 1: Front I/O Panel
1 Power Button w/ LED (see Chapter 4.2.1)
2 Line-out (see Chapter 4.2.2)
3 Mic-in (see Chapter 4.2.3)
4 USB 3.1 Type A (see Chapter 4.2.4)
5 USB 3.1 Type C (see Chapter 4.2.4)
4.2.1.
Power Button with LED
Press this button to turn the system on or off.
The power LED lights up blue if the system powered on.
Prerequisite: The system must be attached by means of the power cord to an appropriate mains (DC).
Even when the system is turned off via the power button there is still a standby voltage on
the baseboard. The unit is only completely disconnected from the DC mains, when the power
is removed.
Table 1: Power LED Status
LED Status
Description
Blue LED on
S0 Power Status
Blue LED Blink
S1 Power Status
Red LED Blink
S3 Power Status
Red LED On
S4 / S5 Power Status
LED Off
EUP Power Status
4.2.2.
Line-Out
The stereo headphone jack is used to connect the system‘s audio out signal to amplified speakers or headphones.
1
2
3
4
5
