SBOX-5210 - User Guide, Rev. 1.0
// 41
To mount the SBOX-5210 please proceed according to the steps described:
1.
Prepare the mounting surface with supplied thumb screws (Figure 16, pos. 3) and if necessary anchors
corresponding to the mounting surface type if no VESA-compliant screw holes are available.
2.
Secure the thumb screws (Figure 16, pos. 3) to the mounting surface. The following figures take VESA mounting to
a monitor as an example.
Figure 18: Securing the thumb screws
3.
Align the screw holes marked number "2" on the VESA adapter with the holes on the bottom side of the chassis of
the SBOX-5210.
4.
Place the VESA adapter (Figure 16, pos. 1) on the chassis.
5.
Secure the VESA adapter onto the chassis with supplied cross-head screws (Figure 16, pos. 2).
Figure 19: Securing the VESA adapter onto the SBOX-5210
6.
Hang the SBOX-5210 onto the hanger knobs located on the thumb screws (Figure 16, pos. 3) fixed on the mounting
surface via the hook slots on the VESA adapter.
