Sandstrom SHFGLC11, Инструкция по эксплуатации

Страница: 15 / 36

Sleep Timer Setting
The sleep timer automatically turns the unit off after a certain time.
1. While the unit is on, press the
SLEEP
button on the remote control to adjust the
TUNER
/
CD / USB / CARD / iPod / AUX in SLEEP mode.
2. Press the SLEEP button repeatedly to select the desired sleep time as below:
90 80 70 60 50
NORMAL
40 30 20 10
3. After setting a desired sleep time, the “ ” indicator will show on the display.
4. The unit will automatically turn to STANDBY mode once it counts down the sleep time.
5. To clear the preset sleep time, keep pressing the
SLEEP
button until the “ ” icon
disappears.
EQ Control
This system supports a variety of equalizers and sound effects.
During playback, press the
EQ button on the remote control to select a desired MUSIC mode.
Each time the
EQ
button is pressed, the MUSIC mode will change to the next one as follows:
PASS CLASSIC ROCK POP JAZZ
6. Tap the
SKIP/TUNE SEARCH
icons on the unit or press the buttons on
the remote control to adjust the minute digits and then press the TIMER button on the
remote control to confirm the TIMER OFF time.
7. Now the “TUNER” indicator will flash on the display. Press the
SKIP/TUNE SEARCH
buttons to select the mode (
TUNER
/
CD
/
USB
/
CARD
/
iPod
).
8. Press the
TIMER
button on the remote control again, the timer “VOL-13” indicator will
flash on the display. Tap the SKIP/TUNE SEARCH icons on the unit or press the
buttons on the remote control to adjust the volume to the desired level.
9. After adjusting “TIMER ON” and “TIMER OFF”, press the
TIMER
button on the remote
control to confirm. The “ ” indicator will show on the display.
10. The unit will be turned on automatically to the selected
TUNER
/
CD
/
USB
/
CARD
/
iPod
mode and turn off when the timer reaches the preset time.
11. To disable the timer setting, press the TIMER button. The “ ” indicator will disappear from
the display.
• Each enable state will be cleared if buttons are not pressed in 10 seconds.
• For the FM tuner timer, it will turn on to the last station you tuned into.
• If the display shows “ERROR” while you set the “TIMER ON” it means both “TIMER ON”
and “TIMER OFF” is the same. In this case, please go to “TIMER OFF” to set the off time
first.
• Volume will automatically adjust to the setting gradually when the timer is ON.
15
SHFGLC11_IB_110608_Zell.indd 15 08/06/2011 2:03 PM