Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as it
could cause corrosion or battery leakage and may result in physical injury and/or property
damage including fire.
Remote Control Operation Range
Point the remote control at the unit no more than 5
metres from the remote control sensor and within 60°
of the front of the unit. The operating distance may
vary depending on the brightness of the room.
FUNCTION
MODE
ENTER
MENU
SKIP TUNE
SEARCH
ON/OFF
DISPLAY
MODE
MENU
ENTER
FUNCTION
REPEAT
PRESET/FOLDER
TIMER
INTRO
EQ
RANDOM
SLEEP
MUTE
VOLUME
30°
30°
Within about 5m
Wall Mounting
Fix the two screws (Size: 3.5*25BA) (not included) onto the wall. They should be parallel to each
other. The distance between the two screws should be 140 mm.
Flip the base stand upward and attach the mounting hold to the screws by following the arrow
direction to mount the unit onto the wall.
The wall where the Base stand unit is to be installed must be capable of long-term
support of the total load of the Hi-Fi System unit. Measures should also be taken to
ensure sufficient strength to withstand the force of earthquakes, vibrations and other
external forces. Incorrect installation can cause the Hi-Fi System to fall and cause injury.
Mounting
hold
Mounting
hold
Screw
Base
stand
Please mind your fingers when
flipping or adjusting the stand.
10
SHFGLC11_IB_110608_Zell.indd 10
08/06/2011 2:03 PM
