Sandstrom SHFGLC11, Инструкция по эксплуатации

Страница: 14 / 36

Adjusting the Volume
Press the
/–
buttons on the unit or the remote control to increase/decrease the
volume.
Press the
MUTE button on the remote control to switch the sound off. The volume level will
flash and the audio output will temporarily stop. Press the
MUTE
button again to resume
audio listening.
Clock Setting
Setting the clock can only be done in STANDBY mode.
When the unit is in STANDBY mode, the STANDBY LED indicator illuminates.
1. In STANDBY mode, Tap and hold the
MODE
Icon on the unit or press and hold the
MODE
button on the remote control until the 24-hour indicator is flashing, then tap the SKIP/
TUNE SEARCH
Icons on the unit or press the buttons on the remote
control to select the 12-hour or 24-hour time format on the display.
2. Tap the MODE Icon on the unit or press the MODE button on the remote control to
confirm, then the hour digits will flash.
3. Tap the
SKIP/TUNE SEARCH
Icons on the unit or press the buttons on the
remote control to adjust the hour digits while flashing. Tap the
MODE
Icon on the unit
or press the MODE button on the remote control to confirm, then the minute digits will
flash.
4. Tap the
SKIP/TUNE SEARCH
Icons on the unit or press the buttons on the
remote control to adjust the minute digits while flashing.
5. Tap the
MODE
Icon on the unit or press the
MODE
button on the remote control to
confirm the time.
6. Each enable state will be cleared if any buttons are not pressed within 10 seconds.
Timer Clock Setting
Setting the timer clock in STANDBY mode.
1. Press and hold the
TIMER button on the remote control until
the “ ON” indicator and “00:00” show on the display and the
hour digits flash.
2. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to adjust the
hour digits and then press the
TIMER
button on the remote
control to confirm. The minute digits will flash.
3. Tap the SKIP/TUNE SEARCH icons on the unit or
press the buttons on the remote control to adjust
the minute digits and then press the
TIMER
button on the
remote control to confirm the TIMER ON time.
4. After adjusting “TIMER ON”, “ OFF” indicator will show on
the display and the hour digits flash.
5. Tap the
SKIP/TUNE SEARCH
icons on the unit or
press the buttons on the remote control to adjust the
hours digits and then press the TIMER button on the remote
control. The minute digits will flash.
14
SHFGLC11_IB_110608_Zell.indd 14 08/06/2011 2:03 PM