S&P 5201421400, Руководство пользователя

Страница: 5 / 28

ENGLISH
HCM Wall / Panel Mounted Axial Fans.
The HCM range of wall / panel mounted
axial fans have been manufactured to the
rigorous standards of production and quality
control in accordance with the International
Quality Standards ISO 9001. All
components have been checked and tested
at the end of the manufacturing process.
All appliances are supplied in perfect
condition and operation. However if found to
be defective the unit should be returned to
the supplier in accordance with the terms of
the S&P guarantee. We recommend that
you check the following when receiving this
product:
1. That it is the correct size and model type.
2. That the details on the rating label are
those required: voltage, frequency...
IMPORTANT SAFETY NOTES.
- All installation and electrical connection
work should be carried out in accordance
with all applicable National and Local
Building Code Regulations pertaining to
the country of installation.
- All installation and electrical connection
work must be carried out by suitably
qualified professional person(s).
- If the fan is proposed to be installed in a
system or environment where a gas or
other combustible heating appliances are
present, then it is the installers
responsibility to ensure that sufficient air
make-up is provided for the heating
appliance to operate correctly.
- The fan should be connected to the
electrical supply with correctly sized
cables and should include a double pole
switch with a contact clearance of at least
3mm.
- All HCM fans are incorporate Class II
(double) insulation. No earth connection
is therefore required.
- The HCM series of fans are designed to
extract air up to and including the
maximum air temperature as detailed on
the rating label. Please check before
installation.
- The HCM series of fans are designed for
general ventilation use only. Do Not Use
To Extract Hazardous or Potentially
Explosive Materials and Vapours.
INSTALLATION
Before any installation ensure the fan is
isolated and disconnected from the mains
electrical supply.
Mounting the fan in glass or a panel
(maximum thickness 8mm)
- First cut a circular hole in the glass or
panel in which the fan is to be installed.
Cut the hole size in accordance with the
HCM model size as indicated in Figure
(A1).
- Figure (B). Remove the interior grille (1)
from the fan casing by loosening the
fixing screw (3).
- Remove the exterior grille (with shutters)
by removing the interior plastic fixing nuts
(6).
- Separate the fan casing (3) from the
exterior grille (2).
- From the outside, position the exterior
grille through the hole in the glass / panel
and fix into position (from inside) using
the grille retaining lugs (4). When in
position, twist lugs around to fix.
- From the inside locate the fan casing (3)
through holes provided for exterior grille
threaded rods (7). Fix the interior plastic
nuts (6) onto the threaded rods to secure
the fan casing to the exterior grille. The
glass / wall should be sandwiched
between the exterior grille and interior fan
casing.
This appliance can be used by children aged
from 8 years and above and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not play
with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.