Sanden Vendo BB01, Руководство по программированию

Страница: 9 / 34

Instructions for programming
BB01 Board functions
7
© SandenVendo
1.7 General safety warnings

Carefully read the manual before starting or
loading the vending machine

Protect the vending machine against weather
conditions

Only maintenance technicians should remove
the protective covers

Always read the programming manual before
operating the electronic board settings

Never position the vending machine in direct
sunlight

Never sell the products with the door open

Refer to the routine maintenance chapter to
clean the vending machine

Disconnect the power supply cable before
investigating or unblocking a blocked product

Use a special protection system/Residual
current device or similar.

Install the appliance so that the electrical plug
can be easily accessed afterwards

If the power cable is damaged, it must be
replaced by the manufacturer or by one of its
technical support personnel or by a qualified
electrician.

This machine is not suitable for installation in
areas where water jets are used