Using the Communications Card
(f) Highlight and select the edit box for the affected item. For example, if
Loss of
Source
voltage is to be changed from “85.0” to “83.0,” highlight and select the pres-
ent setting. The following screen will appear:
(g) Enter the desired value. The following screen will appear.
If the operating characteristics and operating parame ters are
not
to be saved to your
computer as a config uration file, proceed to
“Sending a Configuration File to the
Micro-AT Control”
on page 21.
NOTICE
A help screen is available for changing settings.
16
S&C Instruction Sheet 515-506
