Using the Communications Card
(b) Highlight and select
Change
. After a short delay, during which Matlink is
retrieving data from the Micro-AT control, the
Change Configuration
data
window will appear, similar to that shown below. The present settings and alterna-
tive new settings of
Con figuration
items are listed. If an item listed in the
Voltage,
Current
, or
Time
data window is to be changed, proceed to Step 11 (e).
Note that, for factory-set items which are not field adjustable, the alternative settings
are shown as “Not Changeable.”
(c) If an item listed in the
Change Configuration
data window is to be changed,
highlight and select the drop-down setting box for the item. For example, if
Select
Return
is to be changed from “Auto” to “Hold,” highlight and select the appropri-
ate drop-down setting box. A new window will appear listing the alternative
settings, similar to that shown below.
14
S&C Instruction Sheet 515-506
