Sana EUJ-702, Руководство пользователя

Страница: 17 / 36

15
NEVER WASH THE MOUNTING UNIT The mounting unit of the oil extractor
cannot get wet. Never put it in water or splash water on it. The water can cause
the bearing, which is inside the mounting unit, to rust.
DON’T HIT Do not hit the parts with a hammer or any other hard tools. It may
cause deformation or damage of the oil extractor.
CLEANING INSTRUCTIONS
• Cleaning of the oil extractor parts needs to be done immediately after each use, when
the remains of oil and seed pressings are still fresh and easy to clean.
• The following parts should be cleaned in warm, soapy water: auger, front cap, working
unit, feeding tube, funnel, regulating rings and oil pitcher. Use dish soap or other
gentle detergent. Dry the parts using a soft cloth or a paper towel.
• Remember to never wash the extractor‘s mounting unit. The mounting unit of the oil
extractor cannot get wet. Never put it in water or splash water on it. The water can
cause the bearing, which is inside the mounting unit, to rust.
ATTENTION! THE Sana Oil Extractor parts should not be
assembled if they are wet. Wait for the parts to dry
completely before ASSEMBLING AND OPERATIng THE OIL
EXTRACTOR.