Sana EUJ-702, Руководство пользователя

Страница: 11 / 36

9
These seeds and nuts, in order to be pressed properly, should be crushed
to a smaller size. The size of the pieces should be bigger than a flaxseed or sesame
seed, but smaller than a sunflower seed. This could be done with the help of a knife,
blender or a vegetable chopper.
It is always best with all seeds and nuts to start with small quantities and feed them
sowly. But coconut need special caution. It need to be fed into the Sana Oil Extractor
very carefully, and in very small portions (teaspoon at a time). If inserted to the press
in larger amounts, the seeds may cause blockage and damage the parts. Always put
only a few seeds at a time to avoid blockage. If it still occurs, see the „Troubleshooting
guide“ section on page 18. (Problem 7).
PRODUCE WHICH NEEDS TO BE CRUSHED BEFORE PROCESSING:
PRODUCE WHICH HAVE TO BE FED VERY SLOWLY IN SMALL QUANTITIES:
• pumpkin seeds
• walnuts
• hazelnuts
• almonds
• peanuts
• cashew nuts
• brazil nuts
• macadamia nuts.
• coconut shreds
Don‘t blend seeds and nuts into a powder-like consistency. It will give poor yield
and can block the oil extractor.
SEEDS AND NUTS PREPARATION
SEEDS WHICH NEED TO BE SHELLED:
• pumpkin seeds
• sunflower seeds
• walnuts
• hazelnuts
• peanuts
The Sana Oil Extractor extracts oil only from seeds and nuts which are shelled.