San Telequip (P) Ltd.,
504/505 Deron Heights, Baner Road, Baner
Pune 411045, Mah, India
Phone: +91-20-27293455,9764027070,8390069393 Connecting. Converting. Leading!
email:
---------------------------------------------------------------------------------------------------------------------------------------
16
3.2 Overview
This section gives a general status information on Device, network, ERPS and STP.
Figure 4
Device Information,
displays system Kernel and AP versions.
Figure 5
Networking Information,
displays both ‘LAN1 and LAN 2’sinformation on the overview page. The
information provided with networking settings.
The serial server is equipped with two LAN ports and provides two modes of settings,
1.
Dual Subnet Mode
Subnet is a logically visible subdivision of an IP network. The LAN 1 and LAN2 can be assigned to
different subnets. This feature gives the user flexible network manageability.
2.
Redundancy Mode
A goal of
redundant topologies
is to eliminate network downtime caused by a single point of failure.
The LAN1 and LAN2 can be assigned to the same IP network. It will enable the network to recover
rapidly from failure and fault, so that the failures and faults will be bypassed.
Figure 6
