Samyung SRG-315DN, Руководство пользователя

Страница: 7 / 57

6
How to use SN-100 NBDP Terminal
3.3. Call
•
Press
to go to
[DSC] mode
select to the channel by dial [CH]
3.4. DSC Message RX Auto Reply
•
When receive DSC message and Auto ACK on, can
work automatic answer.
•
When receive DSC but Auto ACK off and then
don’t work automatic answer.
(1) How to set
[DSC] mode press / ‘9.SYSTEM SET’
/ ‘0.Etc Set’ / ‘4.Auto Ack’ and finished
setting
.
4. Distress transmit
4.1. Transmit signal(DISTRESS) by
Emergency Transmitter KEY
(1) Hold on 3 seconds [DISTRESS] and then
transmit signal.
(2)
If you don’t have any reply, flicker the
red[DISTS]display as follow on screen and transmit
channel from 1 to 6 after 4 minutes(3min.and
30sec ~ 4min.40sec.).
(3) Press and then stop to transmit.
1. Selection of Channel
1.1. Change [CH] on screen
Select wanted channel by [No. button]
and press [Enter]
1.2.
Press [F6]
Input the wanted channel by [No. button]
Press [Enter]
2.
Selection of Frequency
2.1. TX
•
Press [F7]
input the wanted communicate frequency by
[Number]
press [Enter]
2.2. RX
•
Press [F8]
input the wanted communicate frequency
[Number]
press [Enter]
3. ARQ mode
•
Hold [F2], Select [ARQ] You can access to one
by ARQ MODE.
4. FEC mode
•
Hold [F2], Select [FEC] You can access to one by
FEC MODE.