Samyung SRG-315DN, Руководство пользователя

Страница: 6 / 57

5
SRG-3150DN How to operate basic function and Distress transmitting
1. Set MMSI ID
(Maritime Mobile Service Identity)
•
Press button and ON, It stop at the below
initial display,
•
Then input SELF ID or handle dial/key of the
front panel to be operated regularly.
< Initial Screen >
1.1. Self-ID
•
[DSC] mode / '9. SYSTEM SET' /
'1.Self ID set'
Ex) Input ID 111100000
:
Press any key on the initial screen
Press
to go to
[DSC] mode
twice Press( )and then go
out to 'Main Menu'. (Indicated MMSI Number in
the right side on the bottom)
2. SSB mode
2.1. Channel Selection
•
Press
to go to
[SSB] mode
select to the channel by dial [CH]
[ Ref. ]
☞
Press twice ( ) and
select to [CH] input channel with [No. button]
and then press .
2.2. Frequency Selection
1) Press twice( )and select to [TX]
Input frequency by [No. button]
press .
2) Press twice ( )and select to [RX]
Input frequency by [No. button]
press .
[ Ref. ]
☞
☞ ☞
☞
Missing frequency range, Cannot be
input with alarm sound.
2.3. TX, RX
1) TX
•
Can use it after inputting to the frequency TX/RX
that want to communicate.
•
Press to go to [SSB] mode
input the frequency that want to communicate
Press [Mike switch(PTT)] and communicate .
[ Ref. ]
☞
Don’t have a ATU Tunning date
valor of the first channel, ATU Tuning run
automatically to the emergency TX
(2,182 /
2,1875 / 4,2075 / 6,312 / 8,4145 / 12,477 /
16,8045 kHz).
2) Received gain adjustment
•
Be easy to hear on condition of low noise as down
GAIN and up VOLUME.
3. DSC mode
3.1. Channel Selection
•
Press
to go to
[DSC] mode
select to the channel by dial [CH]
[ Ref. ]
☞
Press twice ( ) and
select to the channel [CH] and input the wanted
channel by [Number]and then press .
3.2.
Frequency Selection
•
Press twice ( ) and select [TX]
Input the wanted frequency by [No. button]
press .
[ Ref. ]
☞
Missing frequency range, Cannot be
input with alarm sound.