44
7. [NBDP Test]
: Transmitting signals of Dot,
Mark, Space. Use for testing printer and NBDP
TX/RX condition.
8. [LCD-off (F12)
: The function of LCD off and
in the case that LCD is off, if any button is
pressed, LCD is on.
(3) Control function in Keyboard
[PgUp]
: Adjust channel to next channel. But if
next channel is not registered, it moves to next
channel of it.
[PgDn]
: Adjust channel to forward channel. But,
if forward channel is not registered, it moves to
forward channel of it.
13.3.
SettingUpTX/RX Frequency
UNIT: kHz
(1) Setting TX frequency
a) Press
[F7]
button on the keyboard.
b) Input the frequency with
[Number button].
[Ref.]
☞
While inputting frequency if press
[
],
[
],
curser will move.
c) Press
[Enter]
button.
[Ref.]
☞
Available TX Frequency range: 1.6MHz
~ 27.5MHz.
(2) Setting Rx frequency
a) Press
[F8]
button.
b) Input the frequency with
[Number button].
[Ref.]
☞
While inputting frequency if press
[
],
[
],
curser will move.
c) Press
[Enter]
button.
[Ref.]
☞
Available RX Frequency range: 95 KHz
~ 29.99999MHz.
(3) Coast Radio Station TX/RX frequency set
up
a) Press
[F3]
button, display as followings.
b) Revert the other station you want to
communicate using
[
],[
],[
],[
]
button.
press
[Enter]
button, the following screen will
show.
c) Revert the channel you want to communicate
using
[
],[
],[
],[
]
button.
press
[Enter]
button.
Set TX/RX frequency to registered freq. on channel
displaying the first display of NBDP.
(4) Setting TX/RX Freq. by calling channel
a) Press
[F6]
.
b) Input the channel with
[Number button]
.
c) Press
[Enter]
button.
13.4. [ARQ] mode
(1) Connecting with the other station by ARQ mode.
Connecting by present adjusting channel.
a) Press
[F2]
button on the keyboard and
Link
Menu
screen shows.
b) Move the cursor with
[
]
/
[
]
button to
‘1.
[ARQ]’
press
[Enter],
then it will be connected
with other party through
[ARQ]
mode in present
setting Channel.
Содержание SRG-315DN
Страница 57: ...56 Chapter 16 Circuit Diagram External Diagram...
