Samwon Tech TEMI1000 Series, Руководство по эксплуатации

Страница: 9 / 80

● Every input data used in this product is set by the set data input key, test name input key and time signal input key.
● The input key for set data is appeared when button is touched in [1-2 Setting button operation] and the value to be set can be input.
● Refer to [7-4 Time signal operation] for time signal input.
● Refer to [11. DI function and operation setting] in [Operation manual] for DI error name input key.
7
1
2
3
4
5 6 7
8
9
10
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
a
d
f
e
b
c
01. Operation and setting
(1) Method for effectiveness of setting button and setting value
● This product is designed as follows when the setting data input button is touched or to check the effectiveness of the input setting data by sound.
● “Beep”
: When the basic setting button is touched or the setting data is input normally
● “Beep and beep” : When the input data by the setting data input key is out of the input range.
● Do not press with sharp thing (Pencil and etc) or excessive force on the input key for basic setting button or setting value.
It may cause the mal operation of the device or damage on the touch panel.
(2) Setting value input method
▶ Set the value of the input key features and descriptions
It displays “Parameter.”
It displays “Setting range.”
It displays “setting display window.”
• It displays “LIMIT ERROR” when it is out of the setting range.
• It displays “INPUT ERROR” when there is an error in setting unit.
It is used to return to original screen after stopping the input.
It returns to the original screen by saving the input data.
It is used for input the decimal point.
It is used for input the symbol (+/-).
It is used for erasing the input data by one character.
It is used for erasing all input data.
It displays the already input setting data.
Ex) Set data input method
Press the set data input button in the corresponding screen
Press the “ENTER ⓕ” key finally after pressing the corresponding number
in sequence (ⓐ→ⓑ→ⓒ→ⓓ→ⓔ)