Samwon Tech TEMI1000 Series, Руководство по эксплуатации

Страница: 26 / 80

24
(4) Program operation #2 operation screen
● It is a screen to display the display lamps for measuring data,
setting data and output volume.
[Fig. 3-20] Program operation #2 operation screen
1
2 3
4
5
6
7
8
9
[Fig. 3-19] Program operation #1 expanded screen
①
②
④
⑤
③
It displays the control output volume (MV). The “ON” state is
displayed in red and “OFF” state is displayed in dark grey.
●
Setting the state lamp in [12. System initial setting] in [Installation manual]
●
Setting up to 24 for lamp in [12. System initial setting]
It displays the control output volume (MV) in temperature.
It displays the control output volume (MV) in humidity.
It displays the currently operated program pattern number and segment number.
It displays the pattern repetition state.
●
The figure in the front in shows the frequency
of repetition and the figure at the end shows the set repetition frequency.
⑧
⑨
⑦
⑥
It displays the partial repetition state.
●
The figure in the front of shows the frequency
of repetition and the figure at the end shows the set repetition frequency.
It displays the currently applied PID ground number.
●
The applied PID group can be checked in [8. PID group] in [Installation manual].
It displays the segment process time and setting time of currently processing segment.
●
The time in the front of shows the
segment processing time and the time at the end shows the set
time in [6-1 Program pattern setting]
It displays the total process time of program operation.