- 7 -
FP120D,FP145D
If ancillary equipment is removed the original guards or safety devices shall be replaced. The
connection of ancillary equipment including any necessary modification of the guarding of t he
machine shall not afford unprotected access to danger areas of the machine. And our authorized
agency are responsible for a future connection of the machine with ancillary equipment only if we
ourselves have designed such connection.
CE Instruction Manual
Setting the machine
15.
Use special equipment e.g. gauges for setting the tool when machine standstill. The setting of
machine can be carried out by the qualified person only.
The setting of machine can be carried out only when the power is disconnected from
the power source.
Reduce the risk of unintentional starting.
16.
Make sure switches of control panel are OFF position before operating main disconnector. Never
leave machine running unattended. Turn power off from the main disconnector. Don’t leave
machine until it comes to a complete stop.
Make sure machine is disconnected from power supply:
17.
Shut down the machine before inspction, maintenance and adjustment. Make sure that all people
are away from the revolving or moving parts before testing the mache.
Make sure hand-held disconnecting device is OFF position and locked with key.
Reaction with emergency situation:
18.
The extruder is provided one emergency button. It is self-latching push-button on the control
panel. The emergency button is colored red and yellow background.
After emergency stop, follow the normal stop procedure and to obviate the hazard soon. Please
see the circuit diagram to connect emergency stop circuit with other ancillary equipment by
qualified engineer.
Electrical equipment
19.
Keep electrical equipment in a good and safe performance is necessary.
1) Have to connect to earth.
www.samway.com
