Samsung WW60A312 Series, Руководство пользователя

Страница: 349 / 360

English 49
Troubl
eshooting
Problem Action
Machine stops.
• Plug the power cord into a live electrical outlet.
• Check the fuse or reset the circuit breaker.
• Close the door and press the Start/Pause button to start the washing
machine.
For your safety, the washing machine will not tumble or spin unless the
door is closed.
• Before the washing machine starts to fi ll, it will make a series of clicking
noises to check the door lock and does a quick drain.
• There may be a pause or soak period in the cycle. Wait brie fl y and the
washing machine may start.
• Make sure the mesh fi lter of the water supply hose at the water taps are
not clogged. Periodically clean the mesh fi lter.
• If the washing machine is not supplied with suf fi cient power, the
washing machine temporarily will not drain or spin. As soon as the
washing machine regains suf
fi cient power, it will operate normally.
Fills with the wrong
water temperature.
• Fully open both taps.
• Make sure the temperature selection is correct.
• Make sure the hoses are connected to the correct taps. Flush water lines.
• Make sure the water heater is set to supply a minimum 120 °F (49 °C) hot
water at the tap. Also, check the water heater capacity and recovery rate.
• Disconnect the hoses and clean the mesh fi lter. The mesh fi lter may be
clogged.
• While the washing machine fi lls, the water temperature may change
as the automatic temperature control feature checks incoming water
temperature. This is normal.
• While the washing machine fi lls, you may notice just hot and/or just cold
water going through the dispenser when cold or warm temperatures are
selected.
This is a normal function of the automatic temperature control feature
as the washing machine determines the water temperature.
Load is wet at the end of
a cycle.
• Use the High or Extra High spin speed.
• Use high ef fi ciency (HE) detergent to reduce oversudsing.
• Load is too small. Small loads (one or two items) may become
unbalanced and not spin completely.
• Make sure the drain hose is not kinked or clogged.
WW3000AM_6KG_LE_00000000_EN.indd 49 WW3000AM_6KG_LE_00000000_EN.indd 49 2021-11-03 10:58:19 2021-11-03 10:58:19