- 1 -
1. Ensure that users do not repair the product themselves.
▶
This may cause harm or shorten the lifetime of the product.
2. Ensure that the power plug is disconnected before performing A/S (especially A/S for electrical parts).
▶
Beware of electric shock
3. Ensure that users do not use several plugs for one outlet at the same time.
▶
This may cause fire from overheating.
4. Check for any marks of physical damage, fusion, cuts or fire damage at the power plug and the outlet.
▶
Repair or exchange it at once if there is some damage. (It could cause electric shock or fire)
5. Ensure that the product is properly earthed.
▶
If not, it may cause electric shocks through electrical leakage.
6. Do not use water directly on the main body when cleaning the product.
▶
This may cause electric shocks or fire, and shorten the lifetime of the product.
7. The line connection for the Harness may not be permeabled by water and must be secure while performing
the A/S.
▶
It should not be split or cut when a limited amount of force is applied.
8. Completely remove dust or foreign substances from any parts such as Housing, the line connection, the
contact point, etc. while performing the A/S.
▶
This will prevent in advance the danger of fire by Tracking, Short Circuits, etc.
9. Check for traces of water permeation of electrical parts and the Harness.
▶
If water has permeated any parts already, exchange the parts or completely remove the moisture.
10. Check the assembly condition of the parts after finishing the A/S.
▶
Maintain the same conditions as before the A/S.
11. When you pull out the power cord, be sure to hold the plug part when pulling the cord out.
▶
If the cord is damaged, it may cause electric shocks or fire.
12. Ensure that the power plug is removed from the outlet when the washing machine is not in use.
▶
Else it may cause electric shock or fire through lightning.
13. Do not use or preserve any kind of flammable spray or ignitable materials such as gasoline, thinner, alcohol,
etc. around the washing machine.
▶
Volatile materials may explode or ignite through electrical sparks.
14. Do not place a bowl filled with water or wet clothes on the washing machine.
▶
If the water spills, it may cause electric shock or fire, and shorten the lifetime of the product.
15. Do not install the washing machine in places exposed to snow or rain.
▶
This may cause electric shock or fire and shorten the lifetime of the product.
16. Do not press any operating buttons using sharp items such as pins, needles etc.
▶
This may cause electric shock or mechanical trouble.
17. Check if the product has been evenly and firmly installed on the ground.
▶
Too much vibration will shorten the lifetime of product.
18. Ensure that a connector is being used to connect a wire to another wire for a complete connection.
▶
If it is treated only with tape, it may cause fire by tracking.
19. If you have to turn the washing machine on its side when performing the A/S, ensure that it is placed down
gently on the ground with support
▶
If the washing machine is turned upside down, some of the parts
may
be damaged by the tub.
1. Precautions
1-1. Safety Precautions
