- 14 -
1. Cycle Display LED
●
It displays the present operating cycle and the setup cycle.
●
Pressing the Pause button displays the amount of cycles remaining.
2. Power Switch
●
This switches the power ON/OFF.
3. Start Switch
●
This is used to Start/Pause the operation.
4. Jog Dial Switch
●
This selects one of the washing courses.
●
The order of the washing courses is as follows: Towel/Cotton/Cotton95
℃
/Cotton75
℃
/Coloureds
/Quick/Wool/Delicate/Bedding/Clean Tub.
5. Types of Functional Buttons
1) Temperature Setting Button
●
This sets the temperature of the wash.
●
However, there is a different temperature limit for each course.
●
The temperature can be selected in the successive order of
℃
(
Cold Water)
→
30
℃→
40
℃
→
60
℃ →
75
℃ →
95
℃
.
●
The selection of the temperature is only available for the Wash Cycle.
●
It is impossible to set the wash temperature during a wash.
●
If the wash temperature button is pressed during washing, the selected temperature is
displayed for 3 seconds.
●
If a temperature is selected, it switches the
℃
LED on.
2) Silver Wash Button
●
Silver Nano particles are supplied during the wash and rinse cycles.
●
The time consumed for the rinse cycle will be longer than for other courses.
●
You could not select the key after the start of any operation.
●
When you select the silver nano key in a single cycle mode, the cycle is set to the default
of the normal course and you can only select the silver nano key in wash or rinse cycles.
●
When the silver nano key is selected, the silver nano kit starts operating its anti-bacteria
function.
- Silver Sterilization: the silver nano kit starts operation in water supply for the washing
cycle or additional supply.
3-1. OVERVIEW OF THE CONTROL PANEL
3.
PRODUCT SPECIFICATIONS
