Samsung WEC8500 Скачать руководство пользователя

Страница: 644 / 689

ANNEX B. Open Source Announcement (WEC8500/WEC8050)

page 644 of 689

ISIC License (BSD -)

Redistribution and use in source and binary forms, with or without modification, are

permitted provided that the following conditions are met:

1) Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer.

2) Redistributions in binary form must reproduce the above copyright notice, this list of

conditions and the following disclaimer in the documentation and/or other materials

provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS''

AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS

OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED

OF THE POSSIBILITY OF SUCH DAMAGE.

GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999

51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA

Everyone is permitted to copy and distribute verbatim copies of this license document, but

changing it is not allowed.

[This is the first released version of the Lesser GPL. It also counts as the successor of the

GNU Library Public License, version 2, hence the version number 2.1.]

Preamble

The licenses for most software are designed to take away your freedom to share and change

it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom

to share and change free software--to make sure the software is free for all its users.

This license, the Lesser General Public License, applies to some specially designated

software packages--typically libraries--of the Free Software Foundation and other authors

who decide to use it. You can use it too, but we suggest you first think carefully about

whether this license or the ordinary General Public License is the better strategy to use in

any particular case, based on the explanations below.

Содержание WEC8500


















































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание WEC8500

Отзывы:

Похожие инструкции для WEC8500

Бренды по названию

Популярные бренды

Samsung WEC8500, Руководство по эксплуатации

Результаты поиска

Содержание WEC8500

Отзывы:

Похожие инструкции для WEC8500

Бренды по названию

Популярные бренды