CHAPTER 4. AP Connection Management
© SAMSUNG Electronics Co., Ltd.
page 209 of 689
Configuration using Web UI
In the menu bar of
<WEC Main window>
, select
<Configuration>
and then select the
<Access Points>
AP selection
<General>
menu in the sub-menus.
After selecting the AP MODE NAME item, click the
<Apply>
button to apply the
configuration.
Figure 109. AP mode configuration
4.2.4.4
AP CLI Access Account
The APC operator can add or remove account information relating to the AP CLI. When the
APC is first installed, a default account is provided (id: root, password: ‘sweap12~’).
Up to three AP CLI accounts can be added, and at least one account must be configured.
Therefore, if there is only one remaining account, it cannot be deleted.
(* While each account may be in any of the three available levels (Administrator/Operator/
Monitor), there are currently no functional differences for the APs.)
Configuration using CLI
Execute the following commands to configure the AP access account.
1) Go to configure
APC mode of CLI.
WEC8500# configure terminal
WEC8500/configure# apc
WEC8500/configure/apc #
2) Add an AP CLI account.
ap-account [ID] [PASSWORD] [LEVEL]
Parameter
Description
ID
This is the ID of the AP CLI account.
Only an alphanumeric value of up to eight characters can be entered.
Password
This is the password of the AP CLI account.
Only an alphanumeric and special letters of up to eight characters can be
entered, and must have more than one alphabet, number, special letters.
Level
This is the level of the AP CLI account.
Available values are administrator/operator/monitor.
Содержание WEC8500
Страница 1: ...Ver 2600 00FK1RGA4 8 0 WEC8500 WEC8050 APC Operation Manual ...
Страница 153: ...CHAPTER 3 Data Network Function SAMSUNG Electronics Co Ltd page 153 of 689 Figure 75 Device Statistics Screen ...
Страница 304: ...CHAPTER 6 Wi Fi Configuration SAMSUNG Electronics Co Ltd page 304 of 689 Figure 172 AP Group Contry Code Configuration ...