Samsung VP-D455, Руководство по обслуживанию

Страница: 38 / 184

4-8
Disassembly and Reassembly
Samsung Electronics
4-2-4 Arm Tension Ass’y, Reel Disk S
4-2-4(a) Disassembly
Note 1 : When disassembling, take care not to deform
the part. Do not stain the post.
1) Separate the Spring Tension Πfrom Hook of Sub
Chassis.
2) Remove the Washer Slit ˇ , and then lift up the Arm
Tension
¨
.
3) Lift up the Reel Disk S ˆ .
Fig. 4-12 Arm Tension Ass’y, Reel Disk S
4-2-4(b) Reassembly
1) Mount the Reel Disk S ˆ .
2) After pushed Arm Tension Ass’y ¨ in the direction
“A”, and then insert into the Pin Ø .
3) Insert the Washer Slit ˇ , and then hang the Spring
Tension Œ to Sub Chassis Hook ´ and Arm Tension
Hook ∏ .
Note 1 : When reassembling or dsiassembling,
position of Spring Tension
Πis same.
Note 2 : When moving inspecting, must be inspect
Back Tension.
Note 3 : When reassembling, confirm that pin of Arm
Tension insert into the Guide Cam.
SPRING TENSION
Œ
SUB CHASSIS HOOK
´
PIN
Ø
WASHER SLIT
ˇ
¨
ARM TENSION ASS'Y
∏
ARM TENSION HOOK
ˆ
REEL DISK S