Samsung VLUU NV10, Руководство по обслуживанию

Страница: 86 / 163

86
Ⅳ. ADJUSTMENT
12. Inspection of the Resolution
A. Purpose
Inspecting the image of the chart and recording the data come from the inspection on the memory.
B. Behavior
①
Do this inspection on the computer. Use the USB cable to connect the camera to the computer.
②
After inspecting the chart, record the result on the adjust2.txt file. And the file will be saved on the memory
card.This procedure will be done by the computer
③
If the USB cable is removed from the computer, the camera restart and run the adjust2.txt file that has Defocus
data. In this moment, adjustment data of the adjust2.txt file is saved on the flashrom.
④ After saving the data on the Flash-rom, delete the "adjust2.txt" to prepare the next procedure.
C. Spec (Standard for checking defect)
The Defocus value must be between –3 and + 3 for meet the specification.
D. Procedure
E. Log File Inspection
No LOG files.
13. Burning Test
A. Purpose
This is for checking the defected camera by repeating the camera functions.
B. Behavior
①
Repeat the specified number of Burning Sequence.
②
Burning Sequences are Image Delete, Single Capture, Flash On Capture_auto,Capture with 2sec selftimer,
Flash On Capture, Macro Capture, Flash On Capture, AF braket Capture * 5, Movie rec 5sec, Movie playback,
LCD Mode_change and All Image Play with slideshow.
③
Whenever each camera functions start, write the previous result on the Log file.
① Before starting the camera functions, type NG on the Log and change it to OK after completing the camera
functions.
② With this method, you can check defected loop and defected functions.