Samsung Ubigate iBG1003, Руководство по установке

Страница: 54 / 72

CHAPTER 5. Option Module Installation
5-6
© SAMSUNG Electronics Co., Ltd.
Installing Mini-Modules
This section provides a procedure to install mini-modules. Be sure to follow
safe ESD (Electrostatic Discharge) handling practices to avoid damage to
module components.
When handling Ubigate iBG1003 or its components, wear grounding
wrist straps to avoid ESD damage to the equipment. Do not directly
touch the backplane with your hand or any metal tool, or you could
shock yourself.
To add a mini-module:
1.
Loosen the 2 retention screws on the back module panel or remove the
existing module from the slot.
Figure 5.7 Preparing a mini-module slot for module insertion
2.
Insert the new module retainer screws into the screw holes on the mini-
module slot until it is fully seated.
Figure 5.8 Aligning a new mini-module