Samsung Ubigate iBG1003, Руководство по установке

Страница: 5 / 72

Ubigate iBG1003 Installation Manual/Ed.04
© SAMSUNG Electronics Co., Ltd.
III
Telephone Connection Requirement
A plug and jack is used to connect this equipment to the premises wiring and
telephone network must comply with the FCC Part 68 rules and requirements
adopted by the ACTA.
A compliant telephone cord and modular plug is provided with this product
which is designed to connect to a compatible Standard Modular jack.
Connection to the telephone network should be made by using standard
modular telephone jacks, type RJ-11C. The RJ-11C plug and/or jacks used
must comply with the FCC Part 68 rules.
CIRCUIT TYPE MODULE TYPE
FACILITY INTERFACE
CODE
NETWORK
JACK
LOOP START
LINE
FXO
T1E1
02LS2
04DU9.DN
04DU9.1KN
04DU9.1SN
04DU9.1SN (PRI)
RJ11C
RJ48C
DID LINE FXS
T1E1
02RV2.T
04DU9.BN
RJ11C
RJ48C
E & M TIE LINE T1E1 04DU9.BN RJ48C
Ringer Equivalence Number
The REN is used to determine the number of devices to be connected to a
telephone line. If the total allowable REN load is exceeded, the phone circuit
may fail to ring. In most cases, the total REN for a telephone line should not
exceed Five (5).
Contact Local Telephone Company, to be certain about the number of devices
connected to a line, which is determined by the total REN.
For earlier products, the REN is separately shown on the label.