Samsung Ubigate iBG1003, Руководство по установке

Страница: 40 / 72

CHAPTER 4. Connecting the Ubigate iBG1003
4-2
© SAMSUNG Electronics Co., Ltd.
Console Port
A terminal (VT-100 or equivalent) or workstation with terminal emulation
software can be used for the operator console. To use a system console to
configure and manage the router, connect it to the console port of the Ubigate
iBG1003. One RJ-45-to-DB-9 adapter cable is provided with the router.
To connect the console cable:
1
. Plug the RJ-45 end of the cable into the console port on the Ubigate
iBG1003 as shown in below figure.
Figure 4.1 Connecting Console Cable
2.
Plug the other end of the cable which has the adapter with the female
DB-9 connector to the communication port on the workstation or
terminal.
3.
Configure the workstation or the terminal for 9,600 bps, 8 data bits,
1 stop bit, no parity, and no flow control.