Manual Wired Network Setup
You can configure your product's wired network connection manually when connecting your product to a network that
requires a Static IP address.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps:
1.
Right click the Network icon on the bottom right of the screen.
2.
In the pop-up menu that appears, click Status.
3.
On the dialog that appears, click the Support tab.
4.
On the Support Tab, click the Details button. The Network connection values are displayed.
To set up your product's wired network connection manually, follow these steps:
1.
Go to the
Network Settings
screen. (
Network
→
Network Settings
)
2.
Select
Start
. The network connection screen appears and the verification process starts.
3.
Select
Stop
. The verification process stops. Select
IP Settings
on the network connection screen. The
IP
Settings
screen appears.
4.
Select the
IP Mode
, and then set the
IP Mode
to
Manual
.
5.
Go to the
IP Address
entry field, and then select the
IP Address
using the remote.
6.
Enter the first portion of the
IP Address
(for example, 105) into the first entry field using your remote. When
done, go to the next field.
7.
Enter the next portion of the
IP Address
. When done, go to the next field.
8.
Repeat the entry process for each field in the
IP Address
.
✎
If you make a mistake when entering a number, re-enter the number to correct it.
9.
When done, go to the
Subnet Mask
fields.
10.
Repeat the same entry process for
Subnet Mask
,
Gateway
, and
DNS Server
.
11.
When done, select
OK
. The network test screen appears and the verification process starts. When the
connection has been verified, the "
You are connected to the Internet. If you have any problems using online
services, please contact your Internet Service Provider.
" message appears.
English - 44
English - 45
Network Features
