Listening through a Receiver
You can listen to sound through a receiver (i.e. Home Theater) instead of the product Speaker. To listen to sound
through a receiver, go to
Receiver
screen (
System
→
(HDMI-CEC)
→
Receiver
). Then select
Receiver
and set to
On
.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO
OUT (OPTICAL)
port of the product.
✎
When the receiver (i.e. Home Theater) is set to On, you can hear sound output from the product’s Optical jack.
When the product is displaying a DTV (air) signal, the product will send out 5.1 channel sound to the receiver.
When the source is a digital component such as a DVD player and it is connected to the product via HDMI, you
will hear only 2 channel sound from the receiver.
Using the ARC function
You can listen to sound from the product through a receiver connected using an HDMI cable without connecting a
separate optical cable. To listen to sound through a receiver using the ARC function, go to
Receiver
screen (
System
→
(HDMI-CEC)
→
Receiver
). Then select
Receiver
and set to
On
.
✎
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the
HDMI IN 2 (MHL / ARC)
port.
✎
To disable the ARC function, set the
Receiver
to
Off
. Even if the product transmits the ARC signal continuously,
the receiver will be blocked from receiving the signal.
English - 120
English - 121
Advanced Features
