Samsung SVR-1630 Скачать руководство пользователя страница 37

Страница: 37 / 78

오류

스타일이

정의되어

있지

않습니다

SVR-1630

Samsung Techwin CO.,Ltd.

2004.07.2001 (v 1.0)

<Time Schedule Setup>

For setting the time schedule, go to the “System” menu.

Weekday Start/End

Sets the time zone during weekdays from Monday to Sunday using the Left and Right buttons. Time
zones that are not set are set to the weekend time zones.

Day Start/End

Sets the day time zones using the Left and Right buttons. Time zones that are not set are set to the night

time zones.

Record Rate/Quality

There are a total of 5 setting conditions. (No Rec./Low/Standard/High/Customer).

Setting conditions apart from “Customer”, “Rate (fps)” and “Quality” are automatically interlocked: when

1fps/Q5 & “Low”, 5fps/Q5 & “Standard”, 15fps/Q5 & “High” are set, the “Customer” Rate (fps) and

Quality can be set separately. The setting conditions for “Event Record”, “Standard” and “Pre Record /

Post Record Time” are set to one second each.

Special Time Record

This menu is used to differentiate recording conditions by setting specific time zones. That is, when you

set specific day time zones for weekdays, you can record differently according to two setting conditions.

The specific time zones are set in the “System” menu.

Содержание SVR-1630















































































Результаты поиска

Содержание SVR-1630

Отзывы:

Похожие инструкции для SVR-1630

Бренды по названию

Популярные бренды

Samsung SVR-1630, Руководство пользователя

Результаты поиска

Содержание SVR-1630

Отзывы:

Похожие инструкции для SVR-1630

Бренды по названию

Популярные бренды