Samsung SVR-1630 Скачать руководство пользователя страница 28

Страница: 28 / 78

SVR-1630

오류

스타일이

정의되어

있지

않습니다

2004.07.2001 (v 1.0)

Samsung Techwin CO.,Ltd.

5. Menu Configuration

For changing the menu, the Jog Dial and Shuttle Ring are replaced by the Up/Down and Left/Right

buttons, respectively.

MENU : Up

AUTO : Left

A/B : Right

RELAY : Down

ENTER : goes to the sub-menu

5.1 Quick

Setup

There are three methods for image recording setup: Quick Setup, Schedule Record and the Event Record

Menu. Quick Setup is for easy setting of recording with the same conditions for all analog channels.

Schedule Record is to set a variety of conditions by time zone and channel. Event Record is to set the

recording conditions for when an event occurs. In addition, Quick Setup includes the Time Setting Menu.

5.1.1 Time

Setting

The time zone is set to “UTC 00:00 Dublin” as default when the DVR is delivered.

The first thing to do in the DVR setup is to match the time to that in the relevant region. The time setting

is very important in terms of protecting users’ recording data.

Changing the time [Date/Time] of the DVR may affect the recording images. In this case, you may need

to format the Hard Disk.

<Button Input Procedure >

-Press the [MENU] button on the front of the SVR-1630.

-Go to the “Quick Setup” menu.

-Go to the “Date/Time” menu of “Quick Setup” (using the arrow keys on the front)

-Press the [ENTER] button.

- When the buttons are properly entered, a window is displayed as shown below.

To go to each sub-menu, select the sub-menu using the arrow keys and press the [ENTER] button.

Содержание SVR-1630















































































Результаты поиска

Содержание SVR-1630

Отзывы:

Похожие инструкции для SVR-1630

Бренды по названию

Популярные бренды

Samsung SVR-1630, Руководство пользователя

Результаты поиска

Содержание SVR-1630

Отзывы:

Похожие инструкции для SVR-1630

Бренды по названию

Популярные бренды