PROGRAMMING CATEGORIES
When programming the SVM 400 there are three types of data, Subscriber Options, SVM 400 Administration
Options, and Phone System Options.
Subscriber Options
These are the options entered by a Subscriber and control the individual behavior of their mailbox.
tions for this can be found in the SVM 400 User Guide.
SVM 400 Administration Options
These are all the programming options for the SVM 400, that are unique to the particular installation.
DS 616 Related Options
This is a collection of DS 616 programming options to make SVM 400 operate correctly. When the SVM 400 is
initialized, much of the set up is completed, but there is still some phone system programming that must be
entered.
Note that if the SVM 400 system is being installed in an existing system (a system that did not previously have
an SVM 400), you will have to use MMC 806 to pre install the system and MMC 724 to assign extension num-
bers to each SVM 400 port. Use any available numbers.
In addition to the MMCs listed below you must set call forwarding to the SVM 400 at every phone that wants to
use voice mail.
The following is a listing of all the DS 616 MMCs that relate to the SVM 400.
SVM 400 Technical Manual Page 20
HOME
PAGE
Table of
Contents
