GB
49
48
Technical Specifications
Design and specifications are subject to change without notice.
Format
VHS PAL/SECAM standard
Heads
Video: 4 rotary heads
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head
Erase: 1 full track erase head
Receiving channel
VHF-I, VHF-III, UHF, Interband/Hyperband
Television system
STANDARD L, B/G -A2/NICAM
Luminance
FM azimuth recording
Colour system
PAL/SECAM/MESECAM/NT4.43
NTSC PB on PAL TV
Tape speed
SP
23.39 mm/sec
LP
11.69 mm/sec
Recording/playback time
SP
3 hours (E-180 Tape)
LP
6 hours (E-180 Tape)
REW time
About 60 sec in REW with E-180
VIDEO
Input
0.5 to 2.0 Vp-p; 75 ohm unbalanced
Output
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Signal-to-noise ratio
Better than 43 dB (SP)
Horizontal resolution
More than 240 lines
AUDIO
Input
-8 dBm, 47 Kohm unbalanced
Output
-8 ± 3 dBm, 1 Kohm unbalanced
Wow and flutter (WTD)
0.4% max (SP)
Signal-to-noise ratio
68 dB min (IHF A filter)
Frequency response
20Hz - 20kHz
Power requirement
230V (AC 50-60 Hz)
Power consumption
Approx. 17 watts
Operation temperature
41°F-104°F (5°C-40°C)
Operation humidity
10%-75%
Weight
2.8 Kg (net)
Dimensions (WxHxD)
360 x 94 x 240 mm
ECO Mode-Reducing Standby power consumption
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday.
It saves actually turning the VCR off.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
$
,
❷
or
➛
,
❿
buttons to select the
RÉGLAGES UTILISATEUR
option.
3
Press the OK button to select this option.
Result:
The
RÉGLAGES UTILISATEUR
menu is displayed.
4
Press the corresponding
$
or
❷
buttons, until the
MODE ÉCO.
is selected.
5
Press the
❿!
button to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the M.A./VCR button
again the display panel will reappear.
6
On completion, press MENU twice to exit the menu.
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
$
,
❷
or
➛
,
❿
buttons to select the
FONCTIONS AVANCÉES
option.
3
Press the OK button to select this option.
Result:
The
FONCTIONS AVANCÉES
menu is displayed.
4
Press the corresponding
$
or
❷
buttons, until the
VEILLE AUTO
option is selected.
5
Press the
❿
button, until you select the time of Auto Power off
interval.
NON 2HEURES 3HEURES
6
On completion, press MENU twice to exit the menu.
Auto Power Off
FONCTIONS AVANCÉES
PROG OPTIONS INSTALL
CLOCK BONUS LANG
$
❷!!
➛❿!!
OK
FIN:
MENU
PDC/VPS PAR DEFAUT:NON
ÉTENDRE SHOWVIEW :NON
VEILLE AUTO
:NON
RÉPÉTITION TOTALE :NON
NOMBRE
RÉPÉT. PROGRAMMÉE: 5
INFO TAG DELETE
$
❷
❿
FIN:
MENU
BONUS
BONUS
OPTIONS
RÉGLAGES UTILISATEUR
PROG OPTIONS INSTALL
CLOCK BONUS LANG
$
❷!!
➛❿!!
OK
FIN:
MENU
OPTIONS
AFFICHAGE ÉCRAN :OUI
SÉLECT.CASSETTE :E180
SYST. COULEUR :AUTO
FORMAT 16:9 :AUTO
NICAM STÉRÉO :OUI
MODE ÉCO. :NON
IPC :OUI
$
❷
❿
FIN:
MENU
