8_
operating the cleaner
HEIGHT ADJUSTMENT
Petz Plus (Dual Brush System)
1. Place handle in upright position.
2. Turn height adjustment knob to desired setting.
Bare Floor
- For no -carpeted, indoor surfaces.
Lowest Setting
- For short pile carpets
Medium Setting
- For short and medium pile carpets
Highest Setting
- For plush pile carpet
HANDLE POSITIONS
Press the handle release pedal, located on the lower left side of
the vacuum, with your foot to place your vacuum.
Step 1. Picker Drum : ‘scrapes and make hair ball’
Step 2. Brush Drum : ‘pick up and removes’
1. Upright
- For storage and above floor cleaning with tools.
2. Normal Cleaning
- Press handle release pedal once. Position used for most household
floor cleaning tasks.
3. Low Cleaning
- With the vacuum in normal cleaning position, press handle release
pedal again. Use for reaching under low furniture such as tables,
chairs or beds.
operating the cleaner
For optimal cleaning performance, adjust to the lowest practical setting. If your cleaner
is difficult to push, adjust to the next higher setting.
When the Petz plus moves backward, the pet hair is
stuck on the pet-hair scraper of the picker drum and pet
hairs become hair balls to be sucked easily when moves
forward.
When the Petz plus moves forward, the motorized brush
drum thoroughly picks up and removes pet hair balls and
dust.
The Petz plus is designed to remove pet hair from carpeted
surfaces. It should not be used on pets.
CAUTION
PULL
PUSH
Picker Drum
Brush Drum
