background image

02 OPERA

TING THE CLEANER

operating the cleaner

 _9

CLEANING TOOLS

CARRYING HANDLE (DUST BIN HANDLE)

Attachment tools can be used to clean furniture. drapes, stairs, or in corners.
Place the vacuum on the floor with handle in the upright position while using attachment 
tools.

Special handle for comfortable carrying from room to room or up 
and down stairs.

Combination Dust Brush / Uphoistery Tool :

Two types of cleaning tools are included in one attachment; rotate for desired tool.
• Use Brush side to dust furniture, blinds, books, lamps, shelves, and base boards.
• Use Upholstery side for curtains, draperies, cushions, fabrics.

Crevice Tool : 

Use in tight narrow spaces.

Extension Wand : 

Use with desired attachment for a longer reach.

Option : Mini Turbo Brush or Petz Turbo Brush

Use rotating brush action for small areas such as stairs and upholstery.

Combination Dust Brush / 

Uphoistery Tool

Extension Wand

Crevice Tool

Carrying Handle
(Dust Bin Handle)

Mini Turbo Brush
(Select Models Only)

Petz Turbo Brush
(Select Models Only)

✽  

This tool has rubber comb 
to trap pet hair.

Press gently down and pull towards you in a raking motion. Too much pressure will 
cause the brush to stop rotating.
The Petz Turbo Brush is designed to remove pet hair from carpeted surfaces. It should 
not be used on pets.

The Rotating Brush Drum continues to rotate while tools are in use. To reduce the risk 
of injury from moving parts, always move the cleaner with the carrying handle. Always 
place vacuum cleaner on the floor with handle in upright position when using tools. 
Never place your fingers under the cleaner when it is running. Never place rotating 
brush drum on furniture or uneven surfaces. Do not place vacuum cleaner close enough 
to objects to pull them into rotating brush.

CAUTION

CAUTION

Содержание SU67 Series

















Отзывы: