Samsung SSC-2000 Скачать руководство пользователя страница 2

This symbol indicates high voltage is present
inside. It is dangerous to make any kind of
contact with any inside part of this product.

This symbol alerts you that important litera-
ture concerning operation and maintenance
has been included with this product.

To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions.

1) This device may not cause harmful interference, and

2) This device must accept any interference that may cause

undesired operation.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended
by the manufacturer. 
Dispose of used batteries according to the manufacturer’s

instructions.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, or other apparatus (including amplifiers)
that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plus. 
A polarized plug has two blades with one wider than the 
other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are 
provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of 
the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manu-

facturer.

12. Use only with cart, stand, tripod, bracket, or table speci-

fied by the manufacturer, or sold with the apparatus.
When a used, caution when moving the
cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus. When a cart is

used, use caution when moving the cart/appa-
ratus combination to avoid injury from tip-over.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC 

SHOCK DO NOT OPEN

GB-2

Содержание SSC-2000



















Отзывы: