setup screen
42_
setup screen
Event input
You can set the alarm duration and alarm’s action type of the network camera or encoder.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Event input
>.
3.
Specify an event input device.
Input device setup
- Motion Detection : Recognizes
a detected motion from the
connected device as an alarm.
- Intelligent video : Recognizes a
detected intelligent video analysis
event from the connected device
as an alarm.
- Cam alarm : Recognizes a sensor input event from the connected device as an
alarm.
M
Operable only when the camera registered to the layout supports applicable function and set to
on.
4.
Specify the activation time.
For <
Activation time
> setup, refer to “
Alarm input
”. (Page 41)
5.
Set <
Alarm out duration
> for each alarm.
6.
Select the <
Layout
> for each device’s video display on an event.
If <
Quad
> mode is selected and the desired single layout is assigned to two quad
layouts, the quad layout having smaller layout number is selected and displayed.
When an event occurs, the layout selected for the event is displayed along with
alarm border and alarm message according to the specified display setup, until the
alarm acknowledge button is pressed in the Audio & Video page.
When the alarm acknowledge button is pressed, the screen returns to the layout
previous to the event.
7.
When done, click [
Apply (
)
].
