setup screen
38_
setup screen
OSD position : Selects the position of the on-screen display menu.
If you change the number of OSD positions it will be moved to set number based
on the entire screen.
OSD display : Select types of OSD to be
displayed on the monitor.
Camera name : Shows the camera’s
name used when registering the layout.
b
Decoder time : Shows the time set to the
decoder.
c
Alarm / Error : Shows alarm/error on the
monitor when occurred.
IP address : Shows the camera’s IP
address.
Border : Separates each camera’s screen with border lines.
Preview (
) : Previews changed OSD related settings, and applies when
confirmed.
Applying OSD setup changes does not affect monitor settings.
4.
When done, click [
Apply (
)
].
Audio setup
You can setup audio in/out settings of devices connected to the network video decoder.
1.
From the Setup menu, select the
<
Audio & Video (
)
> tab.
2.
Click <
Audio setup
>.
3.
Adjust the audio I/O levels to your
preference.
Audio output : Set whether to use
audio or not, and its output method.
Gain : It is enabled when selected <
Line out
>, and set the value.
M
Audio is produced only if the device connected supports audio input and set to on.
To select HDMI audio out, the Monitor setting of Display Setup should be set to HDMI.
4.
When done, click [
Apply (
)
].
Gate1
192.168.1.201
01:01:01
b
c
