20_
network connection and setup
network connection and setup
CONNECTING THE NETWORK VIDEO DECODER DIRECTLY
TO DHCP-BASED DSL/CABLE MODEM
1.
Use a cross cable to connect a computer and the Network Video Decoder.
2.
Run the IP Installer and change the IP address of the Network Video Decoder so
that you can use the web browser on your desktop to connect to the Internet.
3.
Access the Network Video Decoder using an Internet browser.
4.
Move to [
Setup
] page.
5.
Move to [
Network
] – [
Interface
], and set the network type to [
DHCP
].
6.
Connect the Network Video Decoder, which was removed from your PC, directly to
the modem.
7.
Restart the Network Video Decoder.
M
For setting the network type, refer to “
Interface
”. (page 39)
AUDIO OUT
VGA
VIDEO OUT
HDMI
Network Video Decoder
Network Camera
DDNS Server
(Data Center, KOREA)
DSL/Cable Modem
INTERNET