112
11
112
11
MAINTENANCE
The suggestions below will help you fulfill any warranty obligations
and allow you to enjoy this product for many years.
Cautions when storing
For safekeeping of the camcorder, turn off the camcorder.
- Remove the battery and AC power adaptor.
- Remove the memory card.
Cleaning the camcorder
Before cleaning, turn off the camcorder and remove the battery
and AC power adaptor.
To clean the exterior
- Wipe gently with a soft dry cloth. Do not apply excessive force
when cleaning. Gently rub the surface.
- Do not use benzene or thinner to clean the camcorder. The
exterior coating could peel off or the case could deteriorate.
To clean the LCD screen
Wipe very gently with a soft dry cloth. Be careful not to damage
the screen.
To clean the lens
Use a blower brush to remove dust, and then wipe the lens gently
with a soft cloth.
If necessary, wipe gently with lens paper or tissue.
- Mould may form if the lens is left dirty.
- If the lens looks dim, turn off the camcorder and leave it off for
about 1 hour.
LCD screen
To prolong its service life, do not rub the LCD screen with a
coarse cloth.
Be aware of the following LCD screen phenomena. They are
not malfunctions.
- When you use the camcorder, the surface around the LCD
screen may heat up.
- If you leave the power on for a long time, the surface around
the LCD screen becomes hot.
•
•
•
•
•
- When using the camcorder in cold conditions, an afterimage
may appear on the LCD screen.
An LCD screen is manufactured using advanced technology
which creates screens with pixel failure rates of less than 0.01%.
However, a black or bright spot (red, blue, white) may appear in
the center of the LCD screen and up to two spots may appear
outside the center. These spots, which are normally incurred
during the manufacturing process, do not affect the recorded
images.
Use the camcorder only after dew condensation has completely
disappeared.
Be sure to use the recommended accessories supplied with the
camcorder. For service, contact your nearest Samsung authorized
service center.
•
•
•
Maintenance & additional information
When there is dew condensation, put the
camcorder aside for a while before using
What is dew condensation?
Dew condensation happens when a camcorder is moved to a location
where there is a significant temperature difference from the previous
location. The dew condenses on the external or internal parts of the
camcorder, and on the reflection lens. If there is dew on or in your
camcorder, it may cause the camcorder to malfunction or damage the
camcorder when you turn the power on.
Exactly when does dew condensation occur?
When you move the camera to a location with a higher temperature
than the previous location, or when you move it to a hot area suddenly.
Examples:
-
You record outside in cold weather during the winter and then
move the camera in indoors.
- You record outside in hot weather after being indoors or inside
a car where the A/C was running.
What can I do?
-
Turn the power off, detach the battery, and leave the camcorder
in a dry area for 1~2 hours before using it.
•
•
•
