167
Setting the Time and Using the Timer
Setting the Current Time
System
>
Time
>
Clock
Try Now
Set the clock manually or automatically. Once the clock has been set, you can select the
INFO
button
to check the current time.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
System
>
Time
>
Clock
>
Clock Mode
Try Now
Set
Clock Mode
to
Auto
. The TV automatically downloads the correct time from a digital channel. To
enable this option, the TV's Antenna jack must be connected to either an antenna or a cable output
and must be receiving digital broadcasts. The accuracy of the time information received may vary
depending on the channel and signal. If your TV is connected to a set-top-box or satellite box using
HDMI or Component connections, you must set the time manually.
"
Availability depends on the specific model and area.
If the Clock is Wrong in Auto Mode...
System
>
Time
>
Clock
>
Time Offset
Try Now
If the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as
-/+ 12 hours. Select
System
>
Time
>
Clock
>
Time Offset
and offset the clock to the correct time.
"
Time Offset
adjusts the time through network connections and is only available if the
Clock Mode
is set to
Auto
and the TV is connected to the Internet though a local area network.
"
Time Offset
will adjust the time if the TV fails to receive time information through normal digital broadcast
signals.
Setting the Clock Manually
Manually enter the time. Set
Clock Mode
to
Manual
and then select
Clock Set
to enter the current
time and date.
Clock Set
: Set the current
Date
and
Time
.
Time Zone
: Select your time zone.
"
This function is only available when the
Clock Mode
is set to
Auto
.
DST
: Switches the DST (Daylight Saving Time) function on or off.
"
This function is only available when the
Clock Mode
is set to
Auto
.
GMT
: Selects your time zone.
"
When Country is set to others, you can use this function.
